Carosol Body Elastic

Body Elastic is free from organic solvents and is used as stone chip protection for the car's most exposed parts.

Hagmans Body Elastic is intended to be used on a car's sill boxes, fender edges, front and rear panels, etc. Body Elastic is also an excellent sound-damping agent, for example in the car's trunk. It is resistant to gasoline and washing with degreasing agents and, if desired, can be overpainted with most of the paint systems available on the market.

Application can be done up to 1mm in one layer. If a thicker layer is desired, let it dry and apply again. Use Hagmans Spray Gun 220 (air pressure approx. 4kg) during application.
The product can also be excellently brushed and rolled.
Equipment and surfaces with wet spills should be cleaned with water.
Dried spills are removed with Hagmans Cellulose Thinner or Synthetic Thinner (Xylene).
Normal layer thickness is 100µm, which corresponds to 1-5 dl/m².
Body Elastic is dry and paintable when the product has changed from purple to black after approx. 60 min at +20°C and 250 µm layer thickness.
Depending on the size of the vehicle and the desired rust and stone chip protection, consumption varies between 1-2 bottles.

Surfaces to be treated shall be well cleaned from dirt, grease, oil, rust and the like, and treated with rust protection primer before Body Elastic is applied. Paint in good condition is slightly dulled with fine sandpaper before application.