Rust and stone chip protection for the car’s sill boxes, front and rear panels, fender edges, etc. Resistant to washing with degreasing agents and can be repainted with car paint. Drying time 15-20 min.
Hagmans
Carosol Body
Additional information
Product information
-
Product description
Hagmans Body is an alkyd-based rust and stone chip protection. -
Area of application
Hagmans Body is intended to be used on the car's door sills, fender edges, front and rear panels, etc., as well as for sound insulation in, for example, the trunk. The product is resistant to gasoline and washing with cold degreaser and, if desired, can be painted over with most paint systems available on the market.
Technical information
-
Base material
Alkyd
-
Colour
Black/white
-
Density
1,3 kg/l
-
Drying time
About 2 hours (+20°C, 50% RH)
-
Flash-point
About 27°C
-
Material consumption
1-2 m²/l
-
Re-paintable
15-20 min
-
Shelf life
2 years
-
Thinner/Cleaning
Hagmans Synthetic Thinner
Application
-
Instructions for use
Application is done with a suction gun (air pressure approx. 4kg) directly from the 1-liter bottle or with a brush or roller. Spraying can also be done with a cup gun, then with a 3mm nozzle. The equipment used for application is cleaned with, for example, Hagmans Synthetic Thinner.
-
Pretreatment
Shake the can thoroughly before use. Surfaces to be treated should be well cleaned of dirt, grease, oil, rust, and the like, and treated with rust protection primer before Body is applied.
We use AI to assist in the translation of product texts. Read more
