Starta

ATF DX II

Starta ATF DX II Classic is intended for GM transmissions from 1968 – 1993. The oil is also used for other transmissions where an oil with DEXRON or DEXRON II specification is prescribed, e.g. Chrysler and certain ZF transmissions.

Additional information

Product information
  • Product description
    Start ATF Classic DX II is based on high-quality mineral oil with special additives to meet the specific friction properties required in GM's gearboxes. The oil has a high viscosity index of 173, which allows the oil to withstand both high temperatures, heavy loads, and has good low-temperature properties. Product number: 1273
  • Area of application
    Starta ATF DX II Classic is intended for GM transmissions from 1968 – 1993. The oil is also used for other transmissions where an oil with DEXRON or DEXRON II specification is prescribed, e.g., Chrysler and certain ZF transmissions. The oil is also used for hydrostatic and manual transmissions in both light and heavy vehicles. The oil can also be used in power steering and in hydraulic systems that require Hydraulic Oil 32. In GM vehicles older than 1968, an oil of TYPE A is primarily recommended. TYPE A does not have exactly the same friction characteristics as ATF DX II Classic but is very close. The products are fully compatible with each other.
  • Specifications
    STARTA ATF DX II Classic meets the following specifications and requirements: – DEXRON, – DEXRON II, – DEXRON IID
    - MAN 339 Type V1/Z1, – MB 236.9,
    - Voith H55.6335.xx, – ZF TE-ML 03D/04D/14A/17C
Technical information
Parameter Value Unit Method
Base Oil

Mineral oil

Colour

Red

Density at 15ºC

855

mm²/s (cSt)

ASTMD7042

Flash-point

>201

°C

ASTMD7346

Pour Point

-48

°C

Viscosity at 100°C

7,2

mm²/s (cSt)

ASTMD2270

Viscosity at 40°C

35,2

mm²/s (cSt)

ASTMD7042

Viscosity Index

172

Documents

We use AI to assist in the translation of product texts. Read more