Auto-K single-component protective clear coat is a high-quality, transparent fast-drying clear coat that provides surface protection. The clear coat has a nitro-alkyd resin base and is available in Gloss or Satin.
Auto-K
1K Klarlack
Additional information
Product information
-
Product description
Auto-K single-component clear coat is a high-quality, transparent clear coat that provides gloss and surface protection.
Features
• Fast-drying
• Brilliant gloss or satin gloss
• Good chemical resistance
• Free from freon (CFC)
• Free from lead, cadmium, chromium -
Area of application
Almost all objects made of sheet metal, metal, wood, ceramics, and plastic can be successfully protected against corrosion, stone chips, wear, and dirt.
Technical information
-
Binder
Nitro alkyd resin
-
Drying time
Dust dry: after about 5-10 minutes, Tack dry: after about 30-40 minutes, Fully dry: after about 24 hours
-
Re-paintable
By oneself: at any time.
Application
-
Instructions for use
Paint build-up:
On wood; 1. Wood primer, 2. Topcoat, 3. Protective clear coat.
On metal; 1. AK Rust Protection Primer, 2. AK Filler/Adhesion Primer, 3. Topcoat, 4. Protective clear coat.
On ceramic; 1. AK Filler/Adhesion Primer, 2. Topcoat, 3. Protective clear coat -
Pretreatment
Shake the can thoroughly for 2 minutes – starting when the mixing balls are heard in the can. Clean and degrease the surface to be painted. Scuff the surface if necessary.
-
Application
Spray at a distance of 15-20 cm. Keep the can as upright as possible during painting. 2 coats: approx. 30 – 40 μm. Start spraying outside the paint area and spray evenly in several thin overlapping layers. Crosswise. Crosswise means spraying first a horizontal and then a vertical layer. Wait about 2 – 3 minutes between each spray.
-
After painting
After finishing painting, turn the can upside down and spray the nozzle empty of paint.
Documents
We use AI to assist in the translation of product texts. Read more
