Free Grundfärg

Water-based primer on a special dispersion basis for decorative purposes.

• Steel, ferrous metals and aluminum: degrease and lightly sand. • Galvanized steel: we recommend a wet detergent wash to remove existing oxide layers. Use standard zinc cleaner, sanding cloth, and dish soap. • Other non-ferrous metals: degrease and lightly sand.
• Stone, glass, ceramics, cardboard, paper, and foam can be painted without further pretreatment. Sand wooden surfaces.
• Plastic: check compatibility. Do not paint safety-relevant plastic components.

All surfaces must be clean, dry, and free from rust and grease. Sand the surface first. Shake the can thoroughly for 1 minute starting from when the mixing balls hit. For technical reasons, the dip tube in an unused can contains a small amount of propellant. Therefore, spray quickly before the first use. Test spray.

Pre-priming with a thin layer and final coating covering after 3-5 minutes with 1-2 sprays. Observe an intermediate airing time of 10 minutes between 2 sprays. Maintain a spray distance of 15 – 25 cm.

After the painting is completed, the can should be turned upside down and the valve sprayed empty. Dispose of completely emptied spray cans as recyclable material.