Hagmans - Golvspackel - Hagmans Nordic

Image	Article number	Size	SDS	SDS 2
	39270	0.6 L	SDS	SDS 2
	39272	6 L	SDS	SDS 2

Two-component epoxy filler that adheres to concrete, plaster, stone, wood, fiberboards, metal, etc. The filler can also be used for gluing and is very strong in both thin and thick layers.

Additional information

Product information

Product description

Smooth two-component adhesive filler, practically odorless. Very durable, even in thin layers. Resistant to aggressive environments and moisture.
Area of application

Bonding, filling, and repair of concrete, stone, wood, steel, ceramics, etc. For example, crack repair of coving, fastening of floor drains, filling of holes and cracks in sheet metal, repair of stone and ceramics, tiles and objects. Can be applied in thicker layers without risk of shrinkage or cracks. Also works for vehicles on, for example, car body sheets, fiberglass, etc.

Technical information

Completely dry

Allow approximately 12 hours at +20°C before the filler is exposed to light traffic. After the filler has cured for 24 hours, it should be sanded to ensure the best adhesion for the next layer. The filler reaches full strength after 5-7 days. NOTE! Minimum temperature for optimal curing is +5°C.
Flammability

Non-flammable
Hårdhet

67 shore D
Potlife

20 minutes at 20°C
Shelf life

2 years
Weight Solids

100%

Application

Instructions for use

Mixing: Comp. A: 1 volume part
Ratio: Comp. B: 1 volume part
Mixture: Equal volume parts are mixed thoroughly until a uniform gray color tone is achieved. Small amounts, up to about 1 kg, can be mixed by hand with a rectangular stirring stick. Larger amounts should be mixed with an electric or compressed air-driven machine mixer, e.g., a low-speed drill with a suitable mixing paddle. Splash protection is recommended.
Pretreatment

The concrete shall be dry and free from dirt, oil, or similar. The cement layer shall be removed by, for example, grinding, blasting, or acid washing. When filling on previously painted surfaces, the surface shall be matte-sanded and all loosely adhering paint removed. For other surfaces, they shall be dry and free from grease, oil, and dirt. Very porous materials should be primed with Hagmans Primer EP.
Application

Apply with a steel or rubber spatula. After about 3 hours of curing, the putty can be smoothed with a damp tool, which facilitates sanding. After this time, our other epoxy products can also be applied. Tools are cleaned with Hagmans Cellulose Thinner or thinner.