Golvfärg 1K Matt

Hagmans Floor Paint 1K is an easy-to-apply, durable, diffusion-open, and waterborne paint with good light and gloss resistance, based on polyurethane/acrylate.

The product is suitable for concrete and wood surfaces indoors and outdoors (NOTE, wooden surfaces, indoors only!) as well as surfaces exposed to light traffic in commercial areas. Since the paint has good diffusion properties, it is suitable for painting on ground floors. To further improve wear resistance and dirt resistance, the paint can be top-coated with Clear Varnish 1K. NOTE, use Hagmans Floor Paint EP-V for garages and premises with chemical handling.

Turn off any underfloor heating before painting. New concrete surfaces must have cured for at least 1 week, be dry, and free from dirt, oil, and the like. The cement skin must be removed by, for example, diamond grinding, sandblasting, or acid washing. Use Hagmans Dammbindning 1K as a primer to increase adhesion and further strengthen the surface on outdoor concrete surfaces, e.g., on balconies or stairs. On untreated wood surfaces, the knots should be treated with Hagmans Spärrgrund and then the entire surface should be primed with wood/paint primer to reduce the risk of discoloration from wood resins (applies especially to wood surfaces that will be painted in white and light colors). When repainting existing paint, the surface should be lightly sanded, and all loose paint should be removed.

With brush or roller. Should be applied in two coats. When priming on absorbent surfaces, the paint is diluted with 20% water. Ensure good ventilation. At humidity above 85%, a matte and streaky surface may occur. Brushes and other equipment are cleaned with water. Minimum surface temperature is +5°C.

Sometimes certain rubber compounds in tires can cause plasticizer migration on waterborne paint or lacquer. On lighter colors, this can be perceived as yellowish marks.

Tool cleaning: Water. Remove as much paint as possible before cleaning. Storage: Cool and frost-free. Environment: Protect skin and eyes from splashes. Avoid inhalation of spray mist and sanding dust. Paint and cleaning liquids must not be released into drains, but collected and disposed of as environmental waste. Empty and dry packaging should be sorted as plastic, metal handles should be removed and sorted as metal.