Effective spray for graffiti removal
| Image | Article number | Size | SDS |
|---|---|---|---|
|
2323475 | 400 ML | SDS |
Belton
Graffiti Remover
Additional information
Product information
-
Product description
Product that effectively removes graffiti and incorrect coatings on surfaces such as cement, brick, concrete, stone, wood, glass, and metal. -
Area of application
Works on most surfaces.
Technical information
-
Drying time
Do not let it dry! Let it work while it is wet and then brush off the dirt and rinse with water. Repeat the process if necessary.
Application
-
Painting
Maintain a spray distance of approximately 20cm. Let it act for 3–5 minutes. Gradually brush the surface to remove any graffiti and dirt. Rinse with plenty of water. Repeat the treatment if necessary.
-
After painting
If eye contact has occurred, rinse immediately with plenty of water and seek medical attention. Wash hands thoroughly after use.
-
After treatment
Note: Allow Belton graffiti remover to work for about 3–5 minutes. Brush continuously to remove the dirt. Rinse with plenty of water. Repeat the process if necessary. If the product gets in your eyes, rinse thoroughly with plenty of water and contact a doctor. Wash your hands thoroughly with plenty of water after use. Follow the information on the label.
Documents
We use AI to assist in the translation of product texts. Read more
