Rimfrost Effekt

Premium, water-based effect varnish for an individual effect of hoarfrost, indoors and outdoors. The result corresponds to a structure of ice crystals. The hoarfrost effect varnish can be overcoated with Belton clear varnish for all effects (item no. 2323399).

Can be used directly on many surfaces, such as iron metals, wood, cardboard, stone, glass, ceramics, clay, and most plastics

Technical information:
Base material: Polyurethane dispersion
Drying time at 20°C: Dust dry 20 min.
Tacky dry: approx. 60 min.
Through dry: approx. 24 hours.
Flash point: -10°C
Fire class: 1
Storage time: 2 years
Contents: 400 ml
Pre-treatment:
Substrates such as non-ferrous metals, galvanized steel, aluminum, and certain plastics should be pretreated with Belton special primer. The surfaces must be smooth, clean, dry, and free of grease. Any uneven surfaces can be slightly sanded if necessary.
Instructions/manual/application:
The frost effect is painted in even, thin layers. The layer thickness affects the effect result. Shake the can for at least 1 minute. Test spray to check compatibility and shade. Spray distance 15-25 cm. The effect is visible after 3-10 minutes. After 60 minutes, top coating can be done with Belton clear lacquer to preserve the effect. If you want to be able to wipe off the effect, do not paint over it.
Turn the can upside down after use and spray the valve empty.

Substrates such as non-ferrous metals, galvanized steel, aluminum, and certain plastics must be pretreated with Belton special primer. The surfaces must be smooth, clean, dry, and grease-free. Any uneven surfaces can be sanded slightly if necessary. Shake the can for at least 1 minute before use.

The frost effect is painted in even, thin layers. The layer thickness affects the effect result. Shake the can for at least 1 minute. Test spray to check compatibility and shade. Spray distance 15-25 cm. The effect is visible after 3-10 minutes. After 60 minutes, top coating can be done with Belton clear lacquer to preserve the effect. If you want to be able to wipe off the effect, do not paint over it.

Turn the can upside down after use and spray the valve empty.