Hagmans

DiffuOne 2.0 Ljusgrå

Hagmans DiffuOne 2.0 is an easy-to-work-with and durable waterborne epoxy coating. The coating is suitable for industry, commerce, garage floors, parking decks, etc.

Additional information

Product information
  • Product description
    Hagmans DiffuOne 2.0 is an easy-to-work-with and durable waterborne epoxy coating.
  • Area of application
    The coating is suitable for industry, trade, garage floors, parking decks, etc.
Technical information
  • Application temperature

    During application and drying, the temperature of both the substrate and the ambient air must be between +12 °C and +30 °C. At the time of application, the paint itself should be at a temperature between +15 °C and +25 °C. Ensure good ventilation so that the water can evaporate before the paint cures. If the relative humidity exceeds 85%, there is a risk that the surface will become matte and patchy.

  • Area of application

    Floor covering

  • Binder

    Epoxy

  • Cleaning

    Water

  • Completely dry

    5-7 days

  • Density

    A-component: 1.16 kg/l, B-component: 2.08 kg/l. Mixed: 1.92 kg/l.

  • Gloss

    5-10

  • Material consumption

    5.8 kg/m² gives 2-3 mm coating

  • Mixing ratio

    Part A: 8 parts by weight, Part B: 92 parts by weight

  • Potlife

    1 hour

  • Ready-to-use after:

    about 1 day

  • Shelf life

    2 years

  • Tools for painting

    Notched trowel, steel edging, pin rake, spiked roller

  • Water permeability

    Vapour permeable

Application
  • Pretreatment

    New concrete floors shall have cured for at least one week, be dry, and free from dirt, oil, etc.
    The cement skin shall be removed through, for example, diamond grinding. If grinding has been done, there is a high risk that hidden pores (pinholes) have been exposed, which will cause blisters or craters in the coating. To avoid this, priming one or two times with Floor Paint EP-V/Thick Film Paint EP-V/Floor Paint EP-V Fast is required. Wait a few hours and inspect the floor for pinholes.
    If the surface looks good, the coating can be applied.
    When repainting existing paint, the surface shall be washed with Hagmans Floor Cleaner and lightly ground with a cleaning machine with a black sanding pad (3M) or with a sanding net (80), and all loose paint shall be removed.

  • Application

    Always wear covering clothing and eye protection. Components A and B should be mixed thoroughly. An electric or pneumatic machine mixer should be used, e.g., a low-speed drill with a suitable mixing paddle. Be careful and never divide the batches.
    Pour the mixture onto the floor. Spread the mixture with a notched trowel with rounded holes (approx. 5.8 kg/m²). Spike roll within a period of 3-20 minutes after application.
    The coated surface can be exposed to light foot traffic after about 20 hours and vehicle traffic after about 3 days (depending on temperature). The product is fully cured after 5-7 days. The floor temperature must not fall below +10°C.
    If a higher gloss on the coating is desired, EP-V Floor Paint can be applied as a top layer. Use the same batch number on a continuous surface.

Documents

We use AI to assist in the translation of product texts. Read more