Microemulsion. Dilute 1:1-1:3 depending on the degree of contamination. Used on heavily soiled surfaces where it effectively dissolves asphalt, lubricating oils, tar, road salt, etc. Can be used as an engine cleaner. Does not damage paint and rubber.
From +1 up to +25 degrees
Cars and all other vehicles, machines, caravans, boats, etc.
low aromatic
Surfactants and naphtha in microemulsion
Clear transparent
0,98
0.98 kg/l
≥ 61°C
Spädes 1:1 -1:3
2 years
Store frost-free.
Pads 1:1-1:3 depending on the level of soiling
- Apply with a low-pressure spray or similar, let it act for at least 3-5 minutes. The longer it sits and works, the better effect Prewash has on tar & grease stains.
* Never apply the product on hot surfaces or in direct sunlight. Never let the product dry.
- Rinse with water, best results are achieved with a high-pressure washer.
We use AI to assist in the translation of product texts. Read more
