Fläckisolergrund

Fast-drying special primer with very good covering properties for treating stains from water, nicotine, oil, smoke, tar, asphalt, waxed surfaces, etc., before painting.

Technical information:
Binder: Special resin
Film thickness: after 2 cross coats: approx. 40-50 ?m
Drying time
Dust dry: after approx. 20 minutes
Tacky dry: after approx. 1 hour
Through dry: after approx. 12 hours

Can be used on wood, fiberboard, gypsum, stone, cement, etc., also works on polystyrene. The primer can easily be painted over and it prevents stains from bleeding through the topcoat. Hagmans Stain-Blocking Primer is free from freon (CFC), lead, cadmium, and chromium.

Shake the can for 2 minutes. Do a test spray. Spray distance approximately 25 cm. Apply 2 layers of Hagmans Stain Isolating Primer in crossing layers. For best results, wait at least 3 hours before overpainting with topcoat. Apply the topcoat in several layers until full coverage has been achieved.

Clean the surface. The surface must be intact, clean, free from fats and release agents.