Hagmans - Golvfärg HP
Image Article number Colour Size SDS SDS 2
38135 Ljusgrå 12 KG SDS SDS 2
38125 Mellangrå 12 KG SDS SDS 2
38115 RAL7040 12 KG SDS SDS 2
Hagmans

Golvfärg HP

Hagmans Floor Paint HP is a two-component solvent-free pigmented epoxy paint, for thin-layer coating and painting.

Additional information

Product information
  • Product description
    Hagmans Floor Paint HP is a two-component, solvent-free pigmented epoxy paint, for thin-layer coating and painting.
  • Area of application
    Hagmans Floor Paint HP is primarily intended as a topcoat for thin-layer coating/thick-film painting on concrete floors. One coat of Floor Paint HP provides a dense and chemical-resistant surface. When applied at 0.3 kg/m², it gives a film thickness of approximately 220μm.
Technical information
  • Area of application

    Painting/thin coating of concrete floor

  • Binder

    Epoxy/cycloaliphatic polyamine

  • Completely dry

    5-7 days.

  • Density

    A-comp.: 1.59 kg/l. B-comp.: 1.05. Mixed: 1.44 kg/l.

  • Flammability

    Not flammable

  • Gloss

    about 90

  • Material consumption

    0.3 kg/m2 (about 3 m2 per kg) gives a layer thickness of about 220μm.

  • Mixing ratio

    A-component 81 weight% – B-component 19 weight%

  • Potlife

    30 min

  • Re-paintable

    Floor paint HP can be walked on after about 12 hours. Any additional coating should be applied within 24 hours. (After 24 hours, the paint must be lightly sanded). The paint reaches full

  • Shelf life

    2 years

  • Temperature at painting

    floor temperature min +12°C

  • Thinner/Cleaning

    Shall not be diluted. Tools are cleaned in acetone.

  • Tools for painting

    brush, rubber squeegee in combination with felt roller

  • VOC category

    (Cat. A/j): 500 g VOC/l

  • Weight Solids

    100%

Application
  • Instructions for use

    The two components are mixed well before application on the floor. Application is done with a brush or rubber squeegee in combination with a felt roller. Brushes and other tools are cleaned with acetone.

  • Pretreatment

    New concrete floors must cure for at least 3 weeks and be dry before flooring work begins. The cement skin is removed with diamond grinding. The surface must always be dry and free from dirt, oil, etc. When repainting old, existing paint or varnish, the surface must always be lightly sanded before applying Golvfärg HP. Any loosely adhering paint or varnish is removed before application. Untreated concrete floors are first primed with Hagmans Häftprimer EP or Hagmans Golvfärg EP-V.

Documents

We use AI to assist in the translation of product texts. Read more

Other products from Hagmans