Spraylim

Strong and permanent contact adhesive that is easy to apply.

Properties:
High initial strength.
Easy to apply.
Controllable spray pattern which eliminates spray mist.

Hagmans Spray Adhesive for permanent bonding. Developed to glue paper, cardboard, wood, fabric, and various types of plastic.

Temperature during application: +15 to +25°C.
For a permanent bond, both surfaces to be glued should be treated. Let dry for 5 to 10 minutes.
When treating porous surfaces, Hagmans Spray Adhesive should be applied in several layers.

Should not be used on polystyrene foam, cellular plastic/Styrofoam, or vinyl plastic.

Point the spray away from the face and adjust the spray width.
Hold the can approximately 12–18 cm from the surface to be sprayed.

The surface must be clean, dry, and free of grease. For example, clean with Hagmans Silicone Remover.

After use, turn the can upside down and spray the valve empty.