Båtlack

Landora Boat Varnish is a urethane-alkyd based clear varnish intended for all wood in both new and old boats. Varnishing over putty is not recommended! If it is done anyway, the putty must be fully cured before it is varnished. The drying time of the varnish is extended by several weeks. Provides a high-gloss, water-repellent, and weather-resistant surface that prevents cracking. Can be used both outdoors and indoors.

Product intended for all wood in both new and old boats. Can also be used on thresholds indoors made of oak, etc.

The paint is stirred well. The surface should be clean, dry, and dust-free.

New wood is primed with Landora Boat Varnish and is then applied 2-3 times with Landora Boat Varnish. Lightly sand with fine sandpaper between coats. Previously varnished wood is cleaned, lightly sanded, and coated 1-2 times. Do not paint when the outside temperature is below +5ºC.

Remove paint from the tools before cleaning. Used tools should be cleaned immediately after painting.
Liquid paint residues and cleaning fluids must not be poured down the drain but should be taken to an environmental station.
Empty packaging should be submitted for recycling.