Fönsterkitt

Landora Window Putty is a non-hardening special putty used for window glazing. It also works excellently for repairing small holes in wood. Does not crack and does not harden.

Glazing should not be performed at temperatures below +5°C.
1. Ensure that both the glass and the frame are dry and free from dirt, moisture, oil, and similar substances.
Wooden surfaces are primed with Landora Primer Oil V.
Teak frames are washed with T-spirits and primed. Steel frames must be treated for rust protection. On aluminum frames, the protective coating is removed, after which degreasing is done with T-spirits.
2. Apply Landora Window Putty and smooth with a putty stick or putty knife dipped in soapy water.
The durability of the putty is extended when overpainted after 4-5 days, for example with Landora Window Paint or Landora Oil Paint. Paint 1-2 mm onto the glass.

Caulking should not be performed at temperatures below +5°C

Leftover product must not be poured into the drain. Leave residues and packaging at your local recycling center/environmental station.
STORE FROST-FREE
KEEP OUT OF REACH OF CHILDREN