Carosol Rostskyddsvax Universal

This anti-corrosion product is based on wax and oil and is transparent and intended to be used when a light anti-corrosion agent is desired. A suitable complement to the car's original anti-corrosion protection, it has a very good penetration ability into cracks, hidden pockets due to its low viscosity. between sheet metal and beam, cavities, threshold boxes.

Hagmans Rust Protection Wax Universal's areas of use include, among others, the car's cavities, such as the inside of doors, door rebates, beams, sill boxes, trunk, etc. It is also excellent for use to protect machines, tools, implements, etc.

Note! Do not spray on open flames or hot objects.

Normal coating thickness is 50 – 100 µm, which corresponds to 0.5-1 dl/m². Dries to a sticky surface (e.g., on a flat metal surface) after about 4-6 hours.

Surfaces to be treated must be well cleaned and dry. Shake the can well before starting application. Ensure good ventilation!

The product in a 1L can is applied with a suction gun or a brush.
Hold the spray bottle/syringe at a distance of 20-40 cm.
Move the bottle/syringe back and forth while spraying until a continuous film is obtained.
This rust protection does not damage the paint, but if any of the contents get on the paint during spraying, it can be removed with paint thinner or cold degreaser.
After spraying, the spray can should be turned upside down, after which the valve is pressed until only propellant comes out. This is to prevent clogging.