Landora - Tak & Panelfärg

Image	Article number	Colour	Variant	Size	SDS
	10200701	Vit	Matt	0.75 L	SDS
	10200901	Vit	Matt	2.5 L	SDS

Paint for painting panels of wood, MDF, chipboard or veneer board etc.

Additional information

Product information

Product description

Landora Ceiling and Panel Paint is specially developed for wooden paneling. The paint has very high adhesion and coverage and provides an even, matte surface. It is used on paneling on both ceilings and walls, including old paneling. Landora Ceiling and Panel Paint works excellently both as a primer and as a topcoat.
Area of application

For painting panels of wood, MDF, chipboard or veneer boards, as well as moldings, door frames, furniture, and other carpentry.

Technical information

Cleaning

Landora Brush Cleaner or Water
Drying time

Drying time at 20°C: approx. 1-2 hours. Recoatable after approx. 6 hours
Gloss

Matt (3)
Material consumption

Approximately 5-8 m²/liter
Tools for painting

Facade brush, roller or pressure sprayer
VOC category

VOC limit value (Cat A/d): 130 g/l (2010)

Application

Painting

Stir well. Minor differences may occur between different batches, so it is advisable to mix the paint from cans with different batch numbers. Smooth surfaces should be sanded before painting.
1. Clean the surface with Landora Painter's Wash and then wipe with a clean cloth. Fill and sand away any unevenness.
2. Paint 2 times with Landora Ceiling and Panel Paint.
After painting

Think of the environment: Leftover paint must not be poured into the drain. Leave paint residues, packaging, and cleaning fluids from tool cleaning at your local recycling center/environmental station. STORE FROST-FREE STORE OUT OF REACH OF CHILDREN
Maintenance

If you have knots in the panel, these can be sealed with Landora Knot Varnish to ensure that they do not bleed through the paint.