Träskydd

Landora Wood Protection is a two-step treatment for qualified wood protection of all types of pressure-impregnated unprotected wood surfaces, outdoors. The product is suitable, for example, for decking, terraces, outdoor furniture, piers, pool decks, etc. A protection that, in addition to excellent preservation of the wood material, also provides a very beautiful appearance. When used correctly, the result is a resilient and maintenance-free beautiful silver-gray surface for many years with good protection against mold and fungi. The annual maintenance work that you have with, for example, wood oil is reduced to normal cleaning. The beautiful silver-gray surface gradually develops over 1-4 months after treatment due to the influence of sun and rain.

Step 1 – Pre-treatment / Washing
Use: Washing for pressure-treated wood
Base: Silicate
Volume dry content: 5%
Density: 1.02 kg/L
Repaintable: 12h
Material consumption: 5-10 m²/liter
Air/surface temperature during painting: 7°C
Step 2 – Impregnation
Use: Wood protection for pressure-treated wood
Binder: Sodium/Potassium silicate
Density: 1.10 kg/L
Dust dry: 1h
Repaintable: 2-4h
Material consumption 2 coats: 5-6 m²/liter
Air/surface temperature during painting: 7°C

Both new and old, previously untreated, wood can be treated. However, it should be completely dry, which is why new pressure-treated wood may need to dry for a few months first. For a velvety smooth final result, the surface can also be lightly sanded with fine sandpaper before treatments.

The product etches glass, so all such surfaces that might be exposed to splashes or similar must be covered before starting the work.

Apply generously with a brush or roller in two coats with a minimum of two hours drying time between them. Allow the surface to dry for at least 4 hours after the second treatment, after which the surface is ready to be walked on. After the treatment, the surface will have an uneven streaky appearance, which gradually, under the influence of weather, develops through a chemical process into a beautiful and smooth surface that gains a light silvery color. This process can be partially accelerated by brushing the surface with water.
The beautiful silver-gray surface gradually develops under the influence of sunlight and takes 1-3 months to fully develop. If the product is used indoors or on glazed surfaces, the color will not develop correctly. Any remaining old wood oil must be completely removed before such surfaces can be treated. After treatment with Landora Wood Protection – Impregnation, you have a finished surface with a beautiful silver-gray appearance.

It is recommended to wash the patio every spring to get rid of dirt and leaf debris that have fallen during autumn and winter.
It is perfectly fine to perform maintenance washing with Landora Wood Protection – Wash. The product is based on silicate and will help extend the lifespan of the decking.
Even though Landora Wood Protection is completely non-toxic, liquid paint residues should not be poured down the drain but should be taken to the local environmental station.