Glaze stain with very good adhesion for glazing furniture, joinery, and other wooden details indoors.
- Good adhesion
- Durable surface
- For wooden surfaces
Landora
Lasyrbets
Additional information
Product information
-
Product description
Waterborne glaze with very good adhesion and durable surface. Used on bare wood surfaces for glazing furniture, moldings, and other wooden details indoors. -
Area of application
The product is used on bare wood surfaces when staining furniture, moldings, and other wooden details indoors.
Technical information
-
Cleaning
Water and soap
-
Drying time
Drying time at 20° C: about 1 hour. Repaintable after about 3 hours
-
Gloss
Semi-matte (20)
-
Material consumption
Untreated wood approx. 6-8 m²/liter. Previously stained wood approx. 10 m²/liter
-
Tools for painting
Fine paintbrush
Application
-
Before painting
Stir well. Between different batches, slight color differences may occur, therefore it is advisable to mix the paint from cans with different batch numbers.
-
Painting
1. Sand the surface carefully along the wood grain. Remove all sanding dust. 2. Apply Landora Glaze Stain evenly over the entire surface in the direction of the wood grain. Several treatments will give a darker color.
-
After painting
Leftover stain must not be poured into the drain. Leave stain residues, containers, and cleaning liquids from cleaning tools at your local recycling center/environmental station.
STORE FROST-FREE
KEEP OUT OF REACH OF CHILDREN
We use AI to assist in the translation of product texts. Read more
