Waterborne enamel paint for painting indoor radiators. Provides a semi-glossy and durable surface that does not yellow. Dries quickly.
- Durable surface
- Yellowing-free
- Water-based
Landora
Elementfärg
Additional information
Product information
-
Product description
Landora Radiator Paint is a semi-gloss waterborne special lacquer paint, based on acrylate, tailored to the requirements of a radiator paint. It has high coverage and filling power and provides a hard and durable finish without yellowing tendencies. The product has good flow and remains open relatively long to allow for smoothing. For best results, it is important to use very good tools intended for waterborne lacquer paints. -
Area of application
The product is intended for radiators and pipes and other already primed surfaces indoors with a surface temperature not exceeding 80°C. Do not use on electric heaters.
Technical information
-
Cleaning
Landora Brush Cleaner or Water
-
Drying time
Drying time at 20° C: approx. 1-2 hours
-
Gloss
Semi-gloss (40)
-
Material consumption
Approximately 6-8 m²/liter
-
Tools for painting
Synthetic brush or high-pressure sprayer
-
VOC category
VOC limit value (Cat A/d): 130 g/l (2010)
Application
-
Painting
Stir well. Between different batches, minor differences may occur, so it is advisable to mix the paint from cans with different batch numbers.
1. Clean the surface thoroughly with Landora Painter's Wash.
2. On blasted substrates, prime twice with Landora Primer V.
3. Apply generously 2 coats of Landora Radiator Paint.
Keep in mind that the radiators must be completely cold during painting. -
After painting
: Leftover paint must not be poured into the drain. Leave paint residues, containers, and cleaning liquids from cleaning tools at your local recycling center/environmental station.
STORE FROST-FREE
KEEP OUT OF REACH OF CHILDREN
We use AI to assist in the translation of product texts. Read more
