HP Binder LT A+B

HP Binder LT consists of solvent-free 2-component colorless epoxy.

The product is primarily intended for use on concrete and cement substrates. Through the combination of colorless HP Binder and colored sand, there are extensive coloring possibilities. This type of coating was often used in the food industry and commerce where wear resistance is required combined with water and chemical resistance.

Comp. A 8.244 kg weight parts = 68.7 weight %
Comp. B 3.756 kg weight parts = 31.3 weight %
Color sand approx. 72 weight parts.
Mix components A and B thoroughly before the filler materials are added. When mixing a divided package, the material must be weighed in.

HP Binder is delivered only uncolored (clear). Color sand is available in various standard colors, see Hagmans color chart.

Comp A 8.244 kg weight parts = 68.7 weight%
Comp B 3.756 kg weight parts = 31.3 weight%

New concrete floors shall cure for at least 3 weeks and be dry before the flooring work begins. The cement skin is removed by diamond grinding, blasting, or milling. Existing floors are thoroughly cleaned by washing before blasting and milling. HP Binder can be used as a primer.

With a brush or rubber squeegee in combination with a felt roller. To efficiently distribute the varnish over larger surfaces, we recommend roughly spreading the varnish with a double-edged foam rubber squeegee. This type of rubber squeegee has been shown to follow small irregularities in the substrate better than the corresponding model in homogeneous rubber. By quickly roughly distributing the varnish on the substrate, one avoids heat buildup in the can, which can cause too rapid curing and blistering. The varnish should be mixed with an electric or air-powered machine mixer, e.g., a low-speed drill with a suitable mixing paddle. Splash protection is recommended.