Belton - Free Kulörer - Hagmans Nordic

Article number	Colour	Variant	Size	SDS
332411	Chokladbrun RAL 8017	Matt	400 ML	SDS
332404	Eldröd RAL 3000	Matt	400 ML	SDS
332406	Gentianablå RAL 5010	Matt	400 ML	SDS
332009	Gulgrön RAL 6018	Blank	400 ML	SDS
332409	Gulgrön RAL 6018	Matt	400 ML	SDS
332010	Ljusgrå RAL 7035	Blank	400 ML	SDS
332410	Ljusgrå RAL 7035	Matt	400 ML	SDS
332408	Lövgrön RAL 6002	Matt	400 ML	SDS
332403	Orange RAL 2004	Matt	400 ML	SDS
332402	Rapsgul RAL 1021	Matt	400 ML	SDS
332012	Svart RAL 9005	Blank	400 ML	SDS
332412	Svart RAL 9005	Matt	400 ML	SDS
332405	Trafikpurpu RAL 4006	Matt	400 ML	SDS
332013	Vit RAL 9010	Blank	400 ML	SDS
332413	Vit RAL 9010	Matt	400 ML	SDS

Waterborne almost odorless spray paint with very good coverage.

Additional information

Product information

Product description

First-class, water-based spray paint (polyurethane dispersion) for decorative, creative, spray coating. The product is available in various shades and clear lacquer in three gloss levels: high gloss, semi-gloss, and matte. The spray paint is odorless and ideal for indoor use.
Area of application

Can be used on most surfaces, e.g., ferrous metals, wood, most plastics, cardboard, paper, glass, stone, ceramics, and Styropor® as a single-coat paint, without priming. Galvanized steel, aluminum, and non-ferrous metals should be pretreated with belton free primer. Wood: pine, spruce, oak, beech without priming; absorbent wood surfaces and treated wood must also be primed.

Technical information

Binder

Polyurethane dispersion
Drying time

Dust dry: 45 min, Tack free: approx. 3 hours, Dry for assembly: 9 hours
Gloss

High gloss: about 80, Satin gloss: about 40, Matte: about 7
Hinding Power

Approx. 2 m² / 400 ml

Application

Before painting

All surfaces must be clean, dry, and free from rust and grease. Sand the surface first.
Wood: dry sanding with grit size P 240
Metal: dry sanding with grit size P 400-P 600.
Shake the can thoroughly for 1 minute from the moment the mixing balls hit.
For technical reasons, the dip tube in an unused can contains a small amount of propellant.
Therefore, spray quickly before the first use. Test spray and check the shade.
Painting

Prime with a thin coat and finish-coat opaque after 5-10 min. in several even sprays. Observe an intermediate ventilation time of 3-5 min. between 2 sprays. One spray corresponds to a dry film thickness of approx. 30 µm. Keep a spray distance of 15-25 cm.
After painting

After completing the painting, the can should be turned upside down and the valve sprayed empty.