Fasadlasyr

Hagmans Fasadlasyr is a semi-matte and transparent water-borne wood stain. The product highlights the wood grain on untreated or previously oiled, vertical wood surfaces, both planed and sawn, outdoors such as facades, windbreaks, fences, log houses, etc. The product is based on a combination of alkyd oil and acrylate, which provides extra long durability. After treatment, a UV- and water-resistant surface is created that protects against drying out and cracking while also preventing growth.

The product is suitable for facades, windbreaks, fences, log houses, etc.

Always start by reading through the instructions on the can and remember to be careful from the beginning. Good tools and careful preparation are essential for a successful painting result. Stir the paint well from the bottom before you start painting. Air and surface temperature are also important for the final result. Do not paint if it is colder than +5°C. The surface must be clean, dry, and solid. Remove loose, porous, and deteriorated wood and loose wood fibers. Wash previously painted surfaces with Hagmans Painter's Wash Outdoor and rinse with water afterwards.

Use an appropriate brush for applying oil and glaze. Paint 2-3 boards at a time. Hagmans Exterior Glaze is normally applied in 2 layers. Apply several thin layers rather than a thick one. However, keep in mind that the color will become darker the more layers are applied. Be particularly careful to treat joints and end grain.

Wipe the tools thoroughly before cleaning them in water. Seal the can tightly after use and keep out of reach of children. Liquid paint residues should not be poured into the drain but taken to the local recycling center.

Use a brush, cloth, or sponge moistened with water and Hagmans Maintenance Wash to clean the surface. Rinse with a regular garden hose.