Landora - Lackfärg V
Image Article number Colour Variant Size SDS
13502801 Antikvit Halvblank 0.3 L SDS
17002801 Antikvit Blank 0.3 L SDS
13599801 Svart Halvblank 0.3 L SDS
17099801 Svart Blank 0.3 L SDS
13500804 Vit Halvblank 0.3 L SDS
17000802 Vit Blank 0.3 L SDS
13502701 Antikvit Halvblank 0.75 L SDS
17002701 Antikvit Blank 0.75 L SDS
13599701 Svart Halvblank 0.75 L SDS
17099701 Svart Blank 0.75 L SDS
13500703 Vit Halvblank 0.75 L SDS
17000701 Vit Blank 0.75 L SDS
13500901 Vit Halvblank 2.5 L SDS
17000901 Vit Blank 2.5 L SDS
+ Show all
Landora

Lackfärg V

Waterborne lacquer paint for painting woodwork indoors. Provides a durable surface that does not yellow.

  • For painting of interior woodwork
  • Excellent coverage
  • Durable surface

Additional information

Product information
  • Product description
    Landora Lacquer Paint is a waterborne lacquer paint for painting woodwork indoors. Provides a semi-gloss, durable surface that does not yellow. Semi-Gloss Lacquer Paint is suitable for most substrates and has very good adhesion.
  • Area of application
    The product is used for painting all types of wooden surfaces, or previously lacquered surfaces, indoors. For example, woodwork, doors, kitchen cabinets, door frames, moldings, furniture, etc. Most substrates of primed wood.
Technical information
  • Cleaning

    Landora Brush Cleaner or Water

  • Drying time

    Drying time at 20°C: approx. 1-2 hours. Recoatable after approx. 6 hours.

  • Gloss

    40 and 80

  • Material consumption

    Approximately 6-8 m²/liter

  • Tools for painting

    Synthetic brush, paint roller, or pressure sprayer.

  • VOC category

    VOC limit value (Cat A/d): 130 g/l (2010). Product VOC: < 130 g/l. MAL code 1993

Application
  • Instructions for use

    For best results, the paint should be applied generously and evenly. Use a high-quality paint roller or synthetic brush. Since the surface dries quickly, avoid going back with the roller or brush on painted areas. Remember to remove any masking tape before the paint has dried.

  • Before painting

    ! Stir well. Between different batches, minor color differences may occur, so it is advisable to mix the paint from cans with different batch numbers.

  • Painting

    1. Clean the surface with Landora Painter's Wash. Rinse with water.
    2. Prime with Landora Primer.
    3. Finish by applying Landora Gloss Paint Semi-Gloss twice.

  • After painting

    : Leftover paint must not be poured into the drain. Leave paint residues, containers, and cleaning liquids from cleaning tools at your local recycling center/environmental station.
    STORE FROST-FREE
    KEEP OUT OF REACH OF CHILDREN

Documents

We use AI to assist in the translation of product texts. Read more

Other products from Landora