Tapetlim

Landora Wallpaper Glue is a starch-PVAc based adhesive for applying fiberglass fabric and wallpapers in dry areas. Provides good adhesion. Not for use on plastic or vinyl.

Suitable for most surfaces, such as chipboard, fiberboard, drywall, old wallpaper, and plaster.

1. Ensure that the substrate is clean, dry, and firm. The substrate must be whole, and joints and irregularities should be sanded and filled. Textured and vinyl wallpapers should be completely removed. Painted surfaces should be washed with Landora Painter's Wash to remove dirt and grease. The substrate must be dry before starting wallpapering.
2. Fill and sand absorbent substrates such as concrete, plaster, and aerated concrete. Pre-paste the entire surface with diluted Landora Fabric and Wallpaper Paste (1 part paste + 1 part water). Allow to dry completely before wallpapering.
3. Spread the paste on the substrate or the wallpaper with a roller. Read the wallpaper manufacturer's instructions. Do not skimp on the paste; the substrate may absorb differently, and the entire surface must have effective paste. During installation, it is important to avoid air pockets between the wallpaper and the wall. Smooth with a steel or plastic spatula from the center out towards the edges to press out the air. Excess paste on the wallpaper can be easily removed with a damp cloth.

Excess glue must not be poured into the drain. Leave residues, packaging, and cleaning solvent from tool cleaning at your local recycling center/environmental station.
Reseal opened can tightly.
STORE FROST-FREE
KEEP OUT OF REACH OF CHILDREN