Starta

Glykol Gul Färdigblandad

Starta Glycol Yellow Longlife is an ethylene glycol with corrosion protection based on OAT acids that suits most engines’ cooling systems. The glycol has a lifespan in cars of up to 250,000 km or a maximum of six years, whichever comes first. Freeze protection approx. -39°C.

  • Silicate-free
  • Longlife up to 6 years
  • Ready to pour directly into the car!

Additional information

Product information
  • Product description
    Starta Glycol Yellow Longlife Fb provides good and long-lasting corrosion protection for the most common metals in cooling systems: copper, tin, brass, steel, cast iron and aluminium. The glycol has a lifespan in passenger cars of up to 25,000 miles and in heavier vans up to 50,000 miles or a maximum of six years, whichever comes first, after which the corrosion protection decreases, which can damage the engine's cooling system. Starta Glycol Yellow Longlife Fb is based on ethylene glycol with special organic acids (OAT) to protect against corrosion, oxidation and reduce cavitation tendencies. The glycol is biodegradable and free of nitrite, amine, borate, phosphate and silicate, which ensures the least possible impact on nature. The glycol also meets the requirements regarding 2-EHA in the latest revision of the CLP regulation. Discharge of smaller quantities does not cause disturbances in the degradation steps of the treatment plants. The glycol is toxic and must not be ingested. The glycol is premixed with deionized water and has a freeze protection down to about -38°C. Starta Glycol Yellow Longlife Fb is mixable with the most common glycols on the market. Product no.: 2078
  • Area of application
    Starta Glycol Yellow Longlife Ready-Mixed is a high-quality Longlife coolant with an extra long lifespan intended for the cooling systems of most combustion engines. Starta Glycol Yellow Longlife Fb can also be used as corrosion protection in closed waterborne heating and cooling systems.
  • Specifications
    Start Glycol Yellow Longlife Ready-mixed conforms to the following international standards and
    OEM Specifications:
    - ASTM D3306 – BS6580:2010 – VW/Audi/Seat/Skoda VAG TL-774D/F(G12+), – Glycanthin
    G30/G34 – MB/Daimler 325.3 – MAN 324SND, – Opel B0401065 – Ford WSS-M97B44-D/E
    - AFNOR NF R 15-601 since November 2020 – CUNA NC 956-16 – JIS K 2234:2018
    - ÖNORM V 5123 – SAE J1034, – UNE 26-361-88
Technical information
Parameter Value Unit Method
Boiling point

>108

°C

D1120

Colour

Yellow

Density at 20ºC

1123,7

kg/m³

D4052

pH, 50 vol % aqueous solution

7,5-9,0

D1287

Documents

We use AI to assist in the translation of product texts. Read more