Landora - Träskydd Tvätt

Image	Article number	Size	SDS
	14011303	3 L	SDS

Landora Wood Protection Wash is a cleaning agent for surfaces used in systems with Landora Wood Protection Impregnation.

Additional information

Product information

Product description

Landora Wood Protection Wash is a cleaning agent for surfaces used in systems with Landora Wood Protection Impregnation. All residues of old wood oil must be removed before these surfaces are treated. Surfaces to be treated should be completely dry, so it is advisable for new pressure-treated wood to dry for a few months before treatment. The product can also be used as an annual maintenance wash. It helps the wood to retain a silver-gray color.
Area of application

Can be used on decking, railings, fences, etc. in connection with Silica treatment (Impregnation).

Technical information

Cleaning

Water
Material consumption

Approximately 5-8 m²/liter, the contents are enough for about 15 m²
Tools for painting

Brush, brush

Application

Instructions for use

1. Apply quickly and generously with a brush or roller. Keep in mind that the minimum working temperature is +8˚C and cover glass, etc., that the product may etch.
2. Let the liquid act on the surface for about 15 minutes.
3. Then scrub the surface so that any dirt that has been loosened is removed. Use a coarse brush or high-pressure washer with a scrubbing nozzle for decks.
4. Rinse the surface with clean water and let the substrate dry thoroughly before impregnation.
After painting

Excess liquid must not be poured into the drain. Leave leftover paint, packaging, and cleaning liquids from cleaning tools at your local recycling center/environmental station.
STORE FROST-FREE
KEEP OUT OF REACH OF CHILDREN