Landora

Golvfärg V

Landora Floor Paint is a waterborne paint intended for painting wooden and concrete floors indoors.

  • For wood and concrete floors
  • For rooms with normal wear
  • Water-based

Additional information

Product information
  • Product description
    Landora Floor Paint is a waterborne paint intended for painting wooden and concrete floors indoors.
  • Area of application
    Can be used in most rooms with normal wear, such as basements, laundry rooms, and staircases.
Technical information
  • Cleaning

    Landora Brush Cleaner or Water

  • Drying time

    Drying time at 20°C: Dust dry approx. 2 hours. Recoatable after approx. 12 hours

  • Gloss

    Semi-gloss (40)

  • Material consumption

    Approximately 6-8 m²/liter

  • Tools for painting

    Paintbrush and paint roller

  • VOC category

    VOC limit value (Cat A/i): 140 g/l (2010)

Application
  • Instructions for use

    ! Do not subject the surface to heavy load during the first seven days. Do not paint on cold floors or at low room temperature (below +15° C). Do not paint on damp concrete floors either. The paint is not intended for painting in garages. Stir well before and during use.

  • Painting

    Stir well. Minor color differences may occur between different batches, so it is advisable to mix paint from cans with different batch numbers. Cleaning is extremely important when using floor paint. Carefully remove spills, grease stains, dust, and the like.

    Untreated concrete floors
    1. Ensure that the concrete is fully cured.
    2. Clean the surface thoroughly with Landora Målartvätt. Any concrete residue should be sanded off and oil stains removed with a degreasing agent. Allow the surface to dry completely before painting.
    3. Apply 2 coats of Landora Floor Paint to the surface.

    Untreated wooden floors
    1. Sand and clean the surface thoroughly. Allow the surface to dry completely before painting.
    2. Apply 2 coats of Landora Floor Paint to the surface. Sand lightly between coats.

    Previously treated floors
    1. Remove loose paint. Surfaces that are still glossy should be lightly sanded.
    2. Clean the surface thoroughly with Landora Målartvätt. Allow the surface to dry completely before painting.
    3. Apply 2 coats of Landora Floor Paint (undiluted).

  • After painting

    : Leftover paint must not be poured into the drain. Leave paint residues, containers, and cleaning liquids from cleaning tools at your local recycling center/environmental station.
    STORE FROST-FREE
    KEEP OUT OF REACH OF CHILDREN

Documents

We use AI to assist in the translation of product texts. Read more