Free Klarlack

First-class, water-based clear lacquer (Polyurethane dispersion) for decorative, creative, spray painting. The product is available in three gloss levels: high gloss, satin gloss, and matte. The spray paint is odorless and ideal for indoor use.

The product can be used on most surfaces, e.g., ferrous metals, wood, most plastics, cardboard, paper, glass, stone, ceramics, and Styropor® as a single-layer paint, without priming.• Galvanized steel, aluminum, and non-ferrous metals should be pretreated with belton free primer.
• Wood: pine, spruce, oak, beech without priming; absorbent wood substrates and treated wood must also be primed.
• Plastic: check compatibility. Paintable plastics can be painted directly with belton free; problematic plastics should be pretreated with belton plastic primer.

All surfaces must be clean, dry, and free from rust and grease. Sand the surface first. Shake the can thoroughly for 1 minute from the moment the mixing balls start to rattle. For technical reasons, the dip tube in an unused can contains a small amount of propellant. Therefore, spray quickly before the first use. Test spray and check the shade.

Prime with a thin layer and finish coat with an opaque layer after 5-10 minutes in several even sprays. Observe an intermediate airing time of 3 – 5 minutes between each of the 2 sprays. Maintain a spray distance of 15 – 25 cm.

After finishing painting, the can should be turned upside down and the valve sprayed empty. Dispose of the completely emptied spray cans as recyclable material.