Hagmans - Golvfärg EP-V - Hagmans Nordic

Article number	Colour	Size	SDS	SDS 2
39351	Gråblå	1 KG	SDS	SDS 2
39301	Ljusgrå	1 KG	SDS	SDS 2
39291	Mellangrå	1 KG	SDS	SDS 2
39421	NCS S 3500-N Grå	1 KG	SDS	SDS 2
39441	Svart	1 KG	SDS	SDS 2
39371	Vit	1 KG	SDS	SDS 2
39352	Gråblå	4 KG	SDS	SDS 2
39302	Ljusgrå	4 KG	SDS	SDS 2
39292	Mellangrå	4 KG	SDS	SDS 2
39422	NCS S 3500-N Grå	4 KG	SDS	SDS 2
39442	Svart	4 KG	SDS	SDS 2
39372	Vit	4 KG	SDS	SDS 2
39354	Gråblå	10 KG	SDS	SDS 2
39304	Ljusgrå	10 KG	SDS	SDS 2
39294	Mellangrå	10 KG	SDS	SDS 2
39424	NCS S 3500-N Grå	10 KG	SDS	SDS 2
39374	Vit	10 KG	SDS	SDS 2
39471	Bas-A	1 KG	SDS	SDS 2
39481	Bas-B	1 KG	SDS	SDS 2
39491	Bas-C	1 KG	SDS	SDS 2
39472	Bas-A	4 KG	SDS	SDS 2
39482	Bas-B	4 KG	SDS	SDS 2
39492	Bas-C	4 KG	SDS	SDS 2
39474	Bas-A	10 KG	SDS	SDS 2
39484	Bas-B	10 KG	SDS	SDS 2
39494	Bas-C	10 KG	SDS	SDS 2

Two-component waterborne epoxy paint.

Chemical resistant
Painting on newly poured concrete after a week
Water-borne
Vapour permeable

Additional information

Product information

Product description

Two-component waterborne epoxy paint.
Area of application

For painting new, old, or previously painted concrete surfaces. Recommended for painting floors that are exposed to moderate chemical and mechanical stress in industrial facilities, warehouses, workshops, etc. The product is also suitable for painting concrete walls.

Technical information

Application temperature

During application and drying, the temperature of both the substrate and the ambient air must be between +12 °C and +30 °C. At the time of application, the paint itself should be at a temperature between +15 °C and +25 °C. Ensure good ventilation so that the water can evaporate before the paint cures. If the relative humidity exceeds 85%, there is a risk that the surface will become matte and patchy.
Binder

Epoxy
Colour

Closest NCS: White – S0502-Y, Light Gray – S2500-N, Gray – S3500-N, Medium Gray – S4502-Y, Gray Blue – S3502-B, Black – S9000-N
Completely dry

At +23°C: about 7 days
Density

Component A 1.05, Component B 1.29 Mixing ratio: Component A 3 parts by weight, Component B 7 parts by weight
Dilution

Water (15%)
Drying time

Allow about 10 hours of curing time before the next coat. However, do not wait longer than 24 hours.
Dust dry

At +23°C: about 6 hours
Flammability

Non-flammable
Gloss

Approx. 80 blank
Material consumption

Approx. 0.12 kg/coating. Average coverage: Primer: 1 kg is enough for 5-7 m². Topcoat: 1 kg is enough for 6-8 m². The actual coverage is affected by the porosity and smoothness of the substrate as well as the application method.
Potlife

2 hours
Re-paintable

At +23°C: about 10 hours
Shelf life

2 years. Store frost-free
Vapor diffusion

Permeable to water in vapor form, ISO 7783
Weight Solids

53%

Application

Instructions for use

Thinning: Approximately 10-20% water when priming on absorbent surfaces. First stir the base and hardener separately. Mix the correct proportions of the components for at least 4 minutes to obtain a homogeneous mixture. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface, weaken the coating's properties, or cause application failure. The total thickness of the paint film should be at least 100 µm, applied in 2 coats.
Pretreatment

New concrete floors must have cured for at least 1 week, be dry, and free from dirt, oil, and the like. The cement skin must be removed by, for example, diamond grinding, blasting, or acid washing. When repainting existing paint, the surface must be lightly sanded, and all loose paint must be removed. After mechanical preparation, loose material and dust must be carefully removed with a vacuum cleaner. The substrate must have a tensile strength of at least 1.5 MPa. When applying to cement-based leveling compounds, their compatibility with thermosetting plastic must first be checked.
Application

With a brush or roller. Should be applied in two coats. Ensure good ventilation so that the water evaporates before the paint hardens. At humidity above 85%, a matt and streaky surface may occur. Small amounts, up to about 1 kg, can be mixed by hand with a rectangular stirring stick for at least 2 minutes. Larger amounts should be mixed for at least 4 minutes with an electric or pneumatic machine mixer, e.g., a low-speed drill with a suitable mixing blade. Splash protection is recommended.
After painting

Rubber compounds can cause plasticizer migration on water-based paint or varnish. On lighter colors, this can be perceived as yellowish marks.