1-component acrylic-based spray putty intended for use on paint damage and sanding scratches, etc. Used on cars, caravans, plastic boats, and in the home, etc. Can also be used as a filler.
| Image | Article number | Size | SDS |
|---|---|---|---|
|
11110 | 400 ML | SDS |
Hagmans
Stålplast Spray Filler 1K
Additional information
Product information
-
Product description
Hagmans Spray Filler 1K is a 1-component acrylic-based spray putty. -
Area of application
Steel Plastic Spray Filler 1K is intended to be used for paint damage and sanding scratches, etc. It is used on cars, caravans, boats, and in the home, etc. It can also be used as a filling primer.
Technical information
-
Base material
Acrylic resin
-
Cleaning
Hagmans Synthetic Thinner or xylene.
-
Completely dry
30-45 min at 20° C
-
Drying time
12-15 min
-
Fire class
1
-
Flash-point
-10°C
-
Shelf life
2 years
Application
-
Instructions for use
Cover adjacent surfaces. Shake the can well, about 1 minute, before starting to spray.
-
Pretreatment
Carefully clean the surface to be coated. Scrape off loose paint and rust. Then sand the surface to be coated. Clean metal surfaces must be treated with a rust-proof primer before applying spray filler.
-
Application
Hold the spray can upright at a distance of 25-30 cm while spraying and move it at a steady speed. Spray the filler evenly and thinly, preferably in several layers with at least 15 minutes in between. After finishing spraying, turn the can upside down and press the valve until only propellant comes out. This is to prevent clogging. Any splashes can be removed with Xylene. At a temperature of +20°C, the surface can be dry- or wet-sanded with fine sandpaper (280-320 dry, approx. 800 wet) after 30-45 minutes. NOTE! Do not spray toward open flames or hot objects.
Documents
We use AI to assist in the translation of product texts. Read more
