Clear solvent-containing lacquer intended for chipboard floors exposed to sunlight.
Hagmans
Topplack PU 4020
Additional information
Product information
-
Product description
Hagmans Topcoat PU 4020 is a moisture-curing one-component polyurethane varnish with very good light and gloss resistance. Note! For professional use only. -
Area of application
Topping of flake and colored sand coatings, outdoor floor paints, and where high requirements for lightfastness are demanded.
Technical information
-
Density
1.0 kg/l
-
Drying time
At +15°C: Approx. 8 hours before the next coating can be applied. The finished coated floor surface can be walked on after approx. 24 hours and reaches full wear resistance after 5-7 days. NOTE! Minimum floor temperature +5°C
-
Flammability
Fire class 2b
-
Gloss
Approx. 90 high gloss.
-
Material consumption
Approx. 0.12 liters per coat on a smooth surface. 1 liter is enough for approx. 8 m².
-
Volume Solids
51% %
Application
-
Instructions for use
Hagmans Topcoat PU 4020 can be brushed or rolled. The substrate must be clean and dry. Should be applied in two coats. At approximately 60% humidity, the next coat can be applied after 8 hours. If the following coating can only take place after 18 hours, the varnish must be lightly sanded. Can be thinned with Hagmans Synthetic Thinner 450/2, which is also suitable for cleaning tools.
Documents
We use AI to assist in the translation of product texts. Read more
