Vävlim

Landora Vävlim is a starch-PVAc based adhesive for applying fiberglass fabric, nonwoven, and vinyl wallpaper with a paper backing.

Landora Vävlim provides excellent adhesion to most surfaces, such as plaster, chipboard, and wood fiber, as well as plaster and old wallpaper, but not on plastic surfaces.

1. Start by removing loose pieces of wallpaper and cut up old wallpaper in the corners. Old vinyl wallpaper or vinyl layers must be removed. Ensure that the surface is clean, dry and firm.
2. Wash painted surfaces with Landora Paint Cleaner. Rinse thoroughly and allow to dry.
3. Sand off primed surfaces. Joints between building panels are glued over with joint strips and
joint putty. Substrates of plaster, concrete and lightweight concrete are puttyed and sanded.
4. Pre-glue the entire surface with Landora Vävlim. Absorbent surfaces are pre-glued with thinned fabric glue
(dilute one part glue to three parts water). Allow to dry completely before wallpapering.
5. Spread the glue on the substrate or wallpaper with a roller. Read the wallpaper manufacturer's instructions.
Do not skimp on the glue, the substrate can absorb differently and every cm² of the surface must have effective glue.
During installation, it is important to avoid air pockets between the wallpaper and the wall. Iron with one
steel or plastic spatula from the center out towards the edges, so that the air is forced out.
Excess glue on the wallpaper is removed with a damp cloth.
Let the fabric dry for about 1 day before any overpainting.

Excess glue must not be poured into the drain. Leave leftovers, packaging, and cleaning solvents from tool cleaning at your local recycling center/environmental station. Reseal opened can properly. STORE FROST-FREE. KEEP OUT OF REACH OF CHILDREN.