Putty on a polyester base. For minor damage in the gelcoat layer on, for example, boats, surfboards, and plastic bodies, also works excellently for damage on enamel and sanitary porcelain. The surface is sanded and polished.
20° C (15 – 35)
Minor damages e.g. boat, surfboard, enamel, sanitary porcelain.
Polyester
Hagmans Cellulose Thinner or thinner.
White
1,57
Sandy after 60 min (air).
Comp. A (putty) is delivered in a jar. Comp. B (hardener) is delivered in a tube.
2b
31°C
Approx. 6-8 minutes with 2% hardener at +20°C
50% benzoyl peroxide
Add 2-3% component B to component A and mix thoroughly
1 year
Can be broken into different shades.
(Cat B/b) 250 g/l (2007).
Apply in thin layers with a steel or rubber spatula. Best working temperature is +20°C. Clean tools with thinner. After 1 hour the surface can be sanded. With wet sandpaper, rubbing, and polish, a glossy surface can be achieved.
Comp. A is carefully mixed with 2-3% Comp. B, mix for a maximum of 5 minutes.
The surface must be clean, dry, and sanded. Degrease the surface with silicone remover before and after sanding.
We use AI to assist in the translation of product texts. Read more
