Hagmans - Golvfärg EP-V
Image Article number Colour Size SDS SDS 2
39351 Gråblå 1 KG SDS SDS 2
39301 Ljusgrå 1 KG SDS SDS 2
39291 Mellangrå 1 KG SDS SDS 2
39421 NCS S 3500-N Grå 1 KG SDS SDS 2
39441 Svart 1 KG SDS SDS 2
39371 Vit 1 KG SDS SDS 2
39352 Gråblå 4 KG SDS SDS 2
39302 Ljusgrå 4 KG SDS SDS 2
39292 Mellangrå 4 KG SDS SDS 2
39422 NCS S 3500-N Grå 4 KG SDS SDS 2
39442 Svart 4 KG SDS SDS 2
39372 Vit 4 KG SDS SDS 2
39354 Gråblå 10 KG SDS SDS 2
39304 Ljusgrå 10 KG SDS SDS 2
39294 Mellangrå 10 KG SDS SDS 2
39424 NCS S 3500-N Grå 10 KG SDS SDS 2
39374 Vit 10 KG SDS SDS 2
39471 Bas-A 1 KG SDS SDS 2
39481 Bas-B 1 KG SDS SDS 2
39491 Bas-C 1 KG SDS SDS 2
39472 Bas-A 4 KG SDS SDS 2
39482 Bas-B 4 KG SDS SDS 2
39492 Bas-C 4 KG SDS SDS 2
39474 Bas-A 10 KG SDS SDS 2
39484 Bas-B 10 KG SDS SDS 2
39494 Bas-C 10 KG SDS SDS 2
+ Show all
Hagmans

Golvfärg EP-V

Two-component waterborne epoxy paint.

  • Chemical resistant
  • Painting on newly poured concrete after a week
  • Water-borne
  • Vapour permeable

Additional information

Product information
  • Product description
    Two-component waterborne epoxy paint.
  • Area of application
    For painting new, old, or previously painted concrete surfaces. Recommended for painting floors that are exposed to moderate chemical and mechanical stress in industrial facilities, warehouses, workshops, etc. The product is also suitable for painting concrete walls.
Technical information
  • Application temperature

    During application and drying, the temperature of both the substrate and the ambient air must be between +12 °C and +30 °C. At the time of application, the paint itself should be at a temperature between +15 °C and +25 °C. Ensure good ventilation so that the water can evaporate before the paint cures. If the relative humidity exceeds 85%, there is a risk that the surface will become matte and patchy.

  • Binder

    Epoxy

  • Colour

    Closest NCS: White – S0502-Y, Light Gray – S2500-N, Gray – S3500-N, Medium Gray – S4502-Y, Gray Blue – S3502-B, Black – S9000-N

  • Completely dry

    At +23°C: about 7 days

  • Density

    Component A 1.05, Component B 1.29 Mixing ratio: Component A 3 parts by weight, Component B 7 parts by weight

  • Dilution

    Water (15%)

  • Drying time

    Allow about 10 hours of curing time before the next coat. However, do not wait longer than 24 hours.

  • Dust dry

    At +23°C: about 6 hours

  • Flammability

    Non-flammable

  • Gloss

    Approx. 80 blank

  • Material consumption

    Approx. 0.12 kg/coating. Average coverage: Primer: 1 kg is enough for 5-7 m². Topcoat: 1 kg is enough for 6-8 m². The actual coverage is affected by the porosity and smoothness of the substrate as well as the application method.

  • Potlife

    2 hours

  • Re-paintable

    At +23°C: about 10 hours

  • Shelf life

    2 years. Store frost-free

  • Vapor diffusion

    Permeable to water in vapor form, ISO 7783

  • Weight Solids

    53%

Application
  • Instructions for use

    Thinning: Approximately 10-20% water when priming on absorbent surfaces. First stir the base and hardener separately. Mix the correct proportions of the components for at least 4 minutes to obtain a homogeneous mixture. Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface, weaken the coating's properties, or cause application failure. The total thickness of the paint film should be at least 100 µm, applied in 2 coats.

  • Pretreatment

    New concrete floors must have cured for at least 1 week, be dry, and free from dirt, oil, and the like. The cement skin must be removed by, for example, diamond grinding, blasting, or acid washing. When repainting existing paint, the surface must be lightly sanded, and all loose paint must be removed. After mechanical preparation, loose material and dust must be carefully removed with a vacuum cleaner. The substrate must have a tensile strength of at least 1.5 MPa. When applying to cement-based leveling compounds, their compatibility with thermosetting plastic must first be checked.

  • Application

    With a brush or roller. Should be applied in two coats. Ensure good ventilation so that the water evaporates before the paint hardens. At humidity above 85%, a matt and streaky surface may occur. Small amounts, up to about 1 kg, can be mixed by hand with a rectangular stirring stick for at least 2 minutes. Larger amounts should be mixed for at least 4 minutes with an electric or pneumatic machine mixer, e.g., a low-speed drill with a suitable mixing blade. Splash protection is recommended.

  • After painting

    Rubber compounds can cause plasticizer migration on water-based paint or varnish. On lighter colors, this can be perceived as yellowish marks.

Documents

We use AI to assist in the translation of product texts. Read more

Other products from Hagmans