Rullspackel Universal

Hagmans Roll Putty Universal is a water-based all-purpose putty based on copolymer.Roll putty makes it easier for you to apply a broad layer of putty before painting or wallpapering.

The product is used indoors in dry areas for roller-applied jointing and wide filling of walls and ceilings made of plaster, concrete, aerated concrete, gypsum boards, etc.

When grinding, use eye protection and a dust filter mask. For further information, see the safety data sheet.

If the surface is to be wallpapered, it should be pre-pasted; follow the wallpaper manufacturer's recommendations.
If the surface is to be painted, follow the paint manufacturer's recommendations.
Slightly wet the roller with water before dipping it into the filler; this helps pick up more filler on the roller. Feel free to use an extension handle when rolling. Wait 5-10 minutes after application so the filler can settle and fill in uneven areas. Then smooth the surface with a wide putty knife and let it dry thoroughly before sanding.

The surface must be clean and free from dust and particles. It is important that the outside temperature is not lower than +5 °C.

Use rollers for application.
If thicker layers are required, instead apply several layers with drying time in between.
Filling ability: Max 10 mm
Grain size: Max 0.3 mm