Hagmans - Stålplast Marine Epoxy
Image Article number Size SDS SDS 2
10830 0.6 L SDS SDS 2
Hagmans

Stålplast Marine Epoxy

Two-component epoxy putty that adheres to fiberglass, most plastics, wood, fiberboard, metal, etc. The putty can be glued and repaired with, it is very strong in both thin and thick layers.

Additional information

Product information
  • Product description
    Hagmans Marine Epoxy is a 2-component putty for marine use. Works well in all environments that require a durable putty that withstands aggressive environments and moisture.
  • Area of application
    Used for gluing, filling, and repairs, even below the waterline of boats, jet skis, surfboards, water skis, etc. Also works excellently on other objects made of fiberglass, wood, steel, sheet metal, aluminum, etc. Can be applied in thicker layers without risk of shrinking or cracking. Also works for the automotive sector.
Technical information
  • Application temperature

    > 5°C

  • Area of application

    Bonding, filling, and repair of concrete, stonework, wood, steel, ceramics, etc.

  • Base material

    Epoxy, cycloaliphatic polyamine

  • Colour

    A-comp: black, B-comp: white. Mixed: gray

  • Density

    A-comp: 1.8, B-comp: 1.3 kg/l

  • Drying time

    Wait approximately 12 hours before the filler is exposed to light traffic. The filler reaches full strength after 5-7 days. (20 °C)

  • Hårdhet

    About 70 shore D

  • Mixing ratio

    Comp.A 1 part by volume. Comp.B 1 part by volume

  • Potlife

    20 min (+20°C)

  • Re-paintable

    After 3 hours with epoxy products.

  • Shelf life

    2 years

  • Thinner/Cleaning

    Hagmans Cellulose Thinner or thinner.

  • Weight Solids

    100%

Application
  • Instructions for use

    Steel or rubber spatula.
    Working time at +20°C 20 minutes. The filler can be smoothed with a damp tool for up to 2 hours. Sandable after approximately 24 hours at +20°C. Tools are cleaned with cellulose thinner. NOTE! The minimum temperature for optimal curing is +5°

  • Pretreatment

    The surface must be dry and clean. When filling on previously painted surfaces, the surface must be lightly sanded. Loose paint is removed.
    Mixing: 1 part by volume component A, 1 part by volume component B. The components are mixed into a homogeneous gray mixture.

Documents

We use AI to assist in the translation of product texts. Read more

Other products from Hagmans